Skip to main content
Request a quote
Two photos side by side: on the left, the glossy black front of a sports car in a garage; on the right, the glossy navy bow of a boat on a covered lift.

Mobile polish, correction and coating · Tulsa and Grand Lake

Correct first. Coat second. At your home or your dock.

Vehicle Polish, paint correction and ceramic coating for cars and trucks. Gelcoat correction and ceramic coating for boats. In the Tulsa area and at Grand Lake.

Mobile ceramic coating for cars, trucks and boats

Detail Chacer comes to you, correcting and ceramic-coating cars, trucks and boats where they're kept: at your home or in your garage, or at your dock, on your lift or in covered storage. Operating in the Greater Tulsa Area and all across Oklahoma to chase your detail, Detail Chacer is regularly in the Tulsa and Grand Lake areas servicing auto and marine assets. Prices include travel within about 30 miles of Tulsa and about 25 miles of Grand Lake. Elsewhere in Oklahoma, a travel fee may apply. Detail Chacer tells you the amount before your appointment, and you agree it in writing before any work starts. Car coatings are $1,600 to $2,200 by vehicle size, confirmed at inspection. Boats get a custom quote, priced by the foot.

A coating is only as good as the surface under it

A ceramic coating seals in whatever is underneath, swirl marks included. That's why every car coating on gloss paint starts with machine paint correction. On boats, the correction your gelcoat needs is set out in your custom quote, before any work starts.

Wax can hide light swirls for a while. Machine correction takes them out. Then the coating goes on.

How we coat a car

  1. We inspect your car and confirm your price before any work starts.

  2. Prep begins with a thorough exterior wash and wheels/tires cleaning.

  3. Chemical and clay decontamination to lift what a wash leaves behind.

  4. Trim taped off, then machine paint correction of light swirl marks and haze.

  5. A panel-prep wipe strips polishing oils so the coating can bond.

  6. The coating goes on by hand, then is leveled and buffed.

  7. You get the care steps, including no washing for the first 7 days.

A car coating usually takes most of a day on site.

What a coating won't do: it won't stop rock chips or deep scratches. What it does: a coating makes washing easier and helps preserve the finish. It still needs proper care.

Car prices

Three car services, each priced by vehicle size, listed from lowest to highest price.

  • Vehicle Polish

    A wash, clay and machine polish to bring up your paint's gloss, without paint correction or a coating. It isn't meant to take out swirl marks or scratches.

    $250 to $325 by vehicle size, for paint in good condition

    If your paint needs more, we tell you at the inspection, before any work starts.

  • Paint correction

    Machine compounding and polishing for swirl marks and clear-coat haze. Does not include ceramic coating.

    Starting prices $560 to $770 by vehicle size, for paint in standard condition

    Deeper defects that need wet-sanding, heavy compounding or more correction steps cost more; you get that price at inspection, before any work starts.

  • Ceramic coating

    Machine paint correction of light swirl marks and clear-coat haze, then a ceramic coating. The correction is included in the price.

    $1,600 to $2,200 by vehicle size

    Deeper scratches and heavy defects may need more work; you get that price at inspection, before any work starts.

Ceramic coating by vehicle size

Your price includes paint correction: machine correction of light swirl marks and clear-coat haze. Deeper scratches and heavy defects may need more work. If your paint needs it, you get that price at inspection, before any work starts. Some deep scratches can't be fully removed.

Car coating price by vehicle size
Vehicle sizeFor examplePrice
Coupe or 2-doorFord Mustang, Chevrolet Corvette, Porsche 911$1,600
Sedan, mid-size SUV or extended-cab pickupHonda Accord, Audi Q5, Toyota Tacoma, Ford F-150 SuperCab$1,800
3-row SUV or full 4-door pickupFord Explorer, Chevrolet Tahoe, Ford F-150 SuperCrew, Ram 1500 Crew Cab$2,000
XL SUV or XL pickupChevrolet Suburban, Cadillac Escalade ESV, Ford F-250 or F-350 dually$2,200

Add-ons, $125 each: glass coating for your windshield and windows · a protective coating for your wheels and brake calipers.

If your paint needs more work than expected, you hear the new price first.

Boat coating and gelcoat correction

Dull, chalky gelcoat can often be brought back with correction. Then you choose the finish: a marine polish with a protective sealant, or a ceramic coating for boats, applied by hand over the corrected gelcoat. Our boat coating price already includes gelcoat correction. Not sure which? Ask us to quote both.

Detail Chacer works at your dock, on your lift or in covered storage with power, where your marina or storage facility allows outside contractors.

Head-on view of a navy boat's bow on a covered lift. The polished steel bow fitting and the glossy hull reflect trees and the dock around it.
  • Ceramic coating: From $100+ per foot depending on condition, needs, and size.
  • Gelcoat correction: From $30+ per foot depending on condition, needs and size.
  • $250 minimum for boat details, gelcoat correction and coating.

Your custom quote sets the final price.

We measure overall length, including the swim platform, to the nearest foot: under 6 inches rounds down, 6 inches or more rounds up. Send your boat's details and we reply with a custom quote. Nothing is paid online. You pay when the job is done.

A navy hull stripe with heavy oxidation, and a finished navy stripe.
A dark hull with heavy oxidation, and a finished hull.

Results depend on the starting condition of the paint or gelcoat.

Before and after examples of Detail Chacer's work.

Where we work

  • Tulsa area

    About 30 miles around Tulsa, including Owasso, Collinsville, Broken Arrow, Jenks and Bixby.

  • Grand Lake

    About 25 miles around the lake, including Grove, Monkey Island, Vinita and Afton.

  • Elsewhere in Oklahoma, or out of state

    A travel fee may apply. We tell you the amount before your appointment, and you agree it in writing before we start. Out of state, ask for a quote.

A classic runabout with a dark hull, cream deck and red stripe, on its trailer inside a boat shop.

On site, we need a standard power outlet within 100 feet of where we work. A water spigot helps; power is the must. No outlet? Message us before you book.

In winter, we work on cars in a heated or climate-controlled garage, yours or one you arrange. Boats are coated in covered or enclosed storage with power.

Our work

Results depend on the starting condition of the paint or gelcoat.

Photos on this site are from real Detail Chacer jobs and were taken by Detail Chacer. Plates, boat names and locations are blurred or cropped out. If you see your vehicle or boat here and would like it removed, contact us and we'll take it down.

Who does the work

One owner, from inspection to final check.

The owner machine polishing the dark blue hull of a boat on a lift at a lake dock. The glossy hull reflects the water and the polisher.
Chace Chezem, owner of Detail Chacer

Detail Chacer is a small, owner-run business. I'm Chace Chezem.

I started young and on the water. My first job, at 16, was gassing and cleaning boats as a dockhand on Grand Lake.

Today: 13+ years running a mobile detailing business for cars and boats. Applying ceramic coatings since 2023.

I moved into correction and coatings for a simple reason. A proper correction and coating truly enhances your asset and helps protect its finish. To me, it's the best way to care for your vehicle or boat!

I inspect every car and boat myself before any work starts, and I do the final check on every job.

On some larger jobs, another detailer I've worked with before, who runs their own detailing business, may help me with the work.

Detail Chacer carries general liability insurance, with a marine endorsement for boat work.

Also: boat details from $15 per foot, with a $250 minimum.

Common questions

Do you need power at my home or dock?

Yes. A standard outlet within 100 feet. No outlet? Message us before you book.

How long does a coating last?

What if it rains?

Coating needs suitable conditions. We don't coat outdoors in rain, high wind or freezing temperatures, and we prefer shade or cover. If the weather isn't suitable, we contact you by 6 pm the day before. Moving your date for weather is always free.

How is my price confirmed?

At a short inspection before we start. If it needs to change, you hear it first. You can say no.

See your price, or ask about your boat

Car owners: see your price now. Boat owners: send your boat's details for a custom quote.

Request a quote Request a boat quote